Motu Digital Performer - Native Instruments DRUMS OverKILL Operation Manual

The instrument mixer channel will allow you to mix, pan, and process
the software's output just like any other existing audio track in Logic.
• If the KONTAKT PLAYER 2 interface is not already open, double click
on the mixer's insert slot to call up the KONTAKT PLAYER 2 interface.
Here you can control and edit all the features and functions that the
product has to offer.
After loading an Instrument, you should be able to trigger it via MIDI using a
keyboard controller. KONTAKT PLAYER 2's sound will generate through the
mixer and directly to your sound card. If the plug-in does not receive MIDI or
generate audio, then make sure to check the following two areas:
• Make sure the Instrument track is selected / record enabled in the
Arrange window.
• The MIDI channel of your MIDI track must correspond to the receive
channel of the loaded instrument.
• Make sure that you have properly configured your soundcard for use
with Logic.
You may also want to refer to the Logic manual which offers additional
instruction in using virtual instruments and plug-ins within a Logic project.

MOTU Digital Performer

• Launch Digital Performer and create an instrument track by selecting
Project -> Add Track -> Instrument Track -> KONTAKT PLAYER 2.
• Create a MIDI track by selecting Project -> Add Track -> MIDI Track.
In Digital Performer's track overview window (or in the sequence editor
window) assign the output of this MIDI track to KONTAKT PLAYER 2
and a MIDI channel.
1 – KONTAKT PLAYER 2