Digidesign Pro Tools - Native Instruments DRUMS OverKILL Operation Manual

• Make sure that you have properly configured your sound card for use
with Sonar.

Digidesign Pro Tools

• Launch Pro Tools.
• Create a new Instrument track by choosing New Track from the File
menu.
• Locate the channel mixer Window -> Mix
• The dark grey box at the topmost section of the Instrument channel
is the RTAS insert section. Click on the first empty slot to show all
available RTAS plug-ins.
• Choose KONTAKT PLAYER 2 from the multi-channel RTAS plug-in >
Instrument menu
• To open the plug-in interface for editing, click once on the insert
slot.
After having loaded an Instrument, you should be able to trigger it via MIDI
using a keyboard controller. KONTAKT PLAYER 2's sound will generate through
the mixer and directly to your sound card. If the plug-in does not receive MIDI
or generate audio, then make sure to check the following areas:
• A physical input may need to be assigned to the instrument track.
• The Instrument track fader (Mix window) may be down.
• The instrument track in not selected in the Edit window.
KONTAKT PLAYER 2 – 1