Table of Contents
Advertisement
Installation & Start-up – HES Series
Sealing Ice Machine to Bin Top.
For machines installed on bins that do not have a drip pan, the perimeter of the ice machine
must be sealed with silicone. A tube of silicone sealant, and instructions are shipped inside the
ice machine for this purpose. (See FIGURE-4 and the instructions below)
1. Set machine on bin making sure that ice discharge chute is centered over bin
top opening.
2. Apply approximately 1/8" fillet bead of silicone to all sides of frame where it
meets bin top as shown in Detail "A". NOTE: make sure that silicone bead on
frame does not interfere with proper casing fitup.
FIGURE – 4
Machine to Bin Top Installation
8
Advertisement
Table of Contents
