Advertisement
Network Connection
After applying power and connecting the IPC to the network;
Load the 'Device Config Tool' software onto a PC/ Laptop on the network.
Launch the Device Search software, and select 'Search', if the network's existing details match
the IPC's default details the device will be recognised.
The default IP address of the IPC is : 192.168.1.168
The default Subnet Mask of the IPC is : 255.255.255.0
Click on the IP address in the search bar to access the IPC.
If the Device Search software cannot find the IPC, then a temporary connection between
PC/Laptop is required, this is achieved by matching the default network details of the IPC to
the PC/Laptop.
Connect the IPC (with Power) to the LAN port to a laptop. Open 'Network Connections',
Select 'Local Area Connection', then 'Properties' to access the following menus;
1. Double Click
2. Enter the following details
4. Add the
additional
TCP/IP address
3. Click
5. Click OK to
complete setup
3
3
Advertisement
