Attaching A Serial Terminal To An Altix 350 System; Figure 1-5 Connecting A Serial Terminal To An L1 Controller - Silicon Graphics Altix 350 Quick Start Manual

Attaching a Serial Terminal to an Altix 350 System

007-4417-001
If your Altix 350 system was shipped in a rack without an optional Level 2 controller, or was
shipped as individual chassis, you should connect a serial terminal to the Level 1 controller
contained in the host system master CPU module as shown in Figure 1-5.
Base compute
module
DB-9 serial port
connector (L1 console)
Figure 1-5
Connecting a Serial Terminal to an L1 Controller
Attaching a Serial Terminal to an Altix 350 System
Serial terminal
7