General Safety Precautions - MULTILANE AT4039EML User Manual

General Safety Precautions

Review the following safety precautions to avoid injury and prevent damage to this
product or any products connected to it. To avoid potential hazards, use this product
only as specified.
Only qualified personnel should perform service procedures.
While using this product, you may need to access other parts of the system. Read the
General Safety Summary in other system manuals for warnings and cautions related to
operating the system.
To Avoid Fire or Personal Injury
Use Proper Power Cord. Only use the power cord specified for this product and certified
for the country of use.
Observe All Terminal Ratings. To avoid fire or shock hazard, observe all ratings and
markings on the product. Consult the product manual for further ratings information
before making connections to the product.
Do not apply a potential to any terminal, including the common terminal that exceeds the
maximum rating of that terminal.
Do Not Operate Without Covers.
Do not operate this product with covers or panels removed.
Avoid Exposed Circuitry. Do not touch exposed connections and components when
power is present.
Do Not Operate with Suspected Failures.
If you suspect there is damage to this product, have it inspected by qualified service
personnel.
Do Not Operate in Wet/Damp Conditions.
Do Not Operate in an Explosive Atmosphere.
Keep Product Surfaces Clean and Dry.
Symbols and Terms in this manual. These terms may appear in this manual:
CAUTION: Caution statements identify conditions or practices that could
result in damage to this product or other property.
CAUTION: Provide adequate cooling. Provide adequate cooling to the board to
avoid damaging any part of it, especially the ATE version of the
board. Refer to the power section to know the power dissipation values
AT4039EML |User Manual
1|P a g e