Garmin CIRRUS PERSPECTIVE SR20 Line Maintenance Manual page 278

__________________________________________________________________
1. With the Perspective system off, insert the navigation database SD Card into the top
card slot of PFD2.
2. Turn the Perspective system on. The following prompt is displayed in the upper left
corner of PFD2:
3. Press the ENT key to confirm the database update. The following screen is displayed:
4. After the update completes, the MFD starts in normal mode. Remove the navigation
database update SD Card from the MFD.
5. Power the Perspective system down.
6. Repeat steps 1 through 4 for the PFD. On the PFD, pressing the ENT key will not work.
Press the YES Softkey.
7. Confirm that the correct update cycle and version is loaded during startup of the MFD.
Page 10-26
Rev. E
Cirrus Perspective™ Line Maintenance Manual
190-00920-00