__________________________________________________________________
L.
Avidyne TAS 6XX
Follow this procedure to configure the system if the aircraft being updated is equipped with an
Avidyne TAS 6xx. Skip this procedure if the aircraft is not equipped with this option.
1. Activate the cursor and rotate the FMS knob once to activate the AIRFRAME menu
on the System Upload page.
2. Select 'Options' from the AIRFRAME window and press ENT.
3. Select 'Avidyne TAS 6XX Option' from the FILE window, and press ENT.
4. Press the LOAD softkey.
5. Monitor the status of the upload. When the upload is finished, press ENT to
acknowledge.
6. View the SUMMARY field and ensure that all items are 'complete'. Verify that PASS
appears in green at the check boxes.
M.
Disable GDU Fan Monitoring
Always load this option to deactivate the fan monitoring.
Follow this procedure to configure the system if the aircraft being updated is equipped with the
Disable GDU Fan Monitoring option. Skip this procedure if the aircraft is not equipped with this
option.
1. Activate the cursor and rotate the FMS knob once to activate the AIRFRAME menu on
the System Upload page.
2. Select 'Options' from the AIRFRAME window and press ENT.
3. Select 'Disable GDU Fan Monitoring Option' from the FILE window, and press ENT.
4. Press the LOAD softkey.
5. Monitor the status of the upload. When the upload is finished, press ENT to
acknowledge.
6. View the SUMMARY field and ensure that all items are 'complete'. Verify that PASS
appears in green at the check boxes.
Page 10-14
Rev. E
NOTE
Cirrus Perspective™ Line Maintenance Manual
190-00920-00