__________________________________________________________________
vi. GDL 69/69A Installation Option
vii. GFC 700 (without YD) Installation Option
viii. GFC 700 (with YD) Installation Option
ix. GTX 32 Installation Option
x. GTX 33 Installation Option
xi. GTX 33 Installation Option
xii. KN63 DME Installation Option
xiii. KN87 ADF Installation Option
xiv. No‐Hazard IPS Installation Option
xv. SR22/TN DIN IEC 751 Oil Temp Sensor Configuration
xvi. SR22/TN MS28043 Oil Temp Sensor Configuration
xvii. Oxygen Installation Option
xviii. Skywatch 497 Installation Option
xix. S‐TEC 55X/55SR Installation Option
xx. WX‐500 Stormscope Installation Option
• For a MFD replacement:
i. GFC700 w/YD ‐ MFD Configuration file
ii. GFC700 w/o YD ‐ MFD Configuration file
11. Move the curser to the AIRFRAME window, turn the small FMS knob to show the list of
Airframe choices, highlight "AHRS ADC Options" in the pop‐up box and press the ENT
key.
12. In the FILE box, turn the small FMS knob to show the list of File choices, you will need to
highlight the File that matches the number of AHRS and ADC units installed on the
aircraft and press the ENT key.
• For a PFD replacement:
i. Press the CLR ALL softkey at the bottom of the display.
ii. Use the FMS knob and ENT key to select the PFD Configuration box.
iii. Press the LOAD softkey.
iv. When the upload is complete, press the ENT key to select OK in the
• For a MFD replacement:
i. Press the CLR ALL softkey at the bottom of the display.
ii. Use the FMS knob and ENT key to select the MFD Configuration box.
iii. Press the LOAD softkey.
Page 7-4
Rev. E
Upload Complete window.
Cirrus Perspective™ Line Maintenance Manual
190-00920-00