Siemens Simatic ET 200AL Manual page 24

Article number
Switching frequency
•
•
•
Total current of the outputs
•
Cable length
•
Encoder
Connectable encoders
•
IO-Link
IO-Link protocol 1.1
Transmission rate
Cycle time, min.
Size of process data, input per module
Size of process data, output per module
Supported IO-Link profiles
Cable length unshielded, max.
Connection of IO-Link devices
•
Interrupts/diagnostics/status information
Substitute values connectable
Alarms
•
Diagnoses
•
Diagnostics indication LED
•
•
•
Potential separation
between the load voltages
Potential separation channels
•
•
IO-Link digital input/digital output module DIQ 16x24VDC/0,5A 8xM12 (6ES7143-5AH00-0BL0)
Equipment Manual, 08/2021, A5E47926885-AB
with resistive load, max.
with inductive load, max.
on lamp load, max.
Current per module, max.
unshielded, max.
2-wire sensor
–
permissible quiescent current (2-wire sen-
sor), max.
Port type B
Diagnostic alarm
Short-circuit
Channel status display
for module diagnostics
For load voltage monitoring
between the channels
between the channels and the power supply
of the electronics
Technical specifications
6ES7143-5AH00-0BL0
100 Hz
0.5 Hz
1 Hz
4 A
30 m
Yes
1.5 mA
Yes
38.4 kBd (COM2)
3 ms
2 byte
2 byte
common profile
20 m
Yes
Yes; channel by channel, parameterizable
Yes; Parameterizable
Yes; outputs to ground; encoder supply to
ground; module by module
Yes; green LED
Yes; green/red LED
Yes; green LED
Yes
No
Yes
23