Siemens Simatic ET 200AL Manual page 23

Technical specifications
Article number
Digital inputs
Number of digital inputs
Input characteristic curve in accordance with IEC
61131, type 3
Number of simultaneously controllable inputs
all mounting positions
Input voltage
•
•
•
Input current
•
Input delay (for rated value of input voltage)
for standard inputs
Cable length
•
Digital outputs
Number of digital outputs
Short-circuit protection
•
Limitation of inductive shutdown voltage to
Switching capacity of the outputs
•
Load resistance range
•
•
Output voltage
•
Output current
•
•
22
–
up to 55 °C, max.
Rated value (DC)
for signal "0"
for signal "1"
for signal "1", typ.
–
at "0" to "1", min.
–
at "0" to "1", max.
–
at "1" to "0", min.
–
at "1" to "0", max.
unshielded, max.
Response threshold, typ.
on lamp load, max.
lower limit
upper limit
for signal "1", min.
for signal "1" rated value
for signal "0" residual current, max.
IO-Link digital input/digital output module DIQ 16x24VDC/0,5A 8xM12 (6ES7143-5AH00-0BL0)
6ES7143-5AH00-0BL0
16; Parameterizable as DIQ
Yes
16
24 V
-3 to +5V
+11 to +30V
3 mA
1.2 ms
4.8 ms
1.2 ms
4.8 ms
30 m
16; Parameterizable as DIQ
Yes; per channel, electronic
0.7 A
2L+ (-50 V)
5 W
48 Ω
4 kΩ
L+ (-0.8 V)
0.5 A
0.5 mA
Equipment Manual, 08/2021, A5E47926885-AB