Wise-4012E; I/O Specification - Advantech WISE-4000 Series User Manual

2.5

WISE-4012E

2.5.1

I/O Specification


Voltage Input
– Channel: 2
– Resolution: 12-bit
– Sampling Rate: 10 Hz (Total)
– Accuracy: ±0.1 V
– Input Range: 0~10 V
– Input Impedance: 100 kΩ
– Supports Data Scaling and Averaging

Digital Input
– Channel: 2
– Logic level
–Dry Contact 0: Open
– Supports 32-bit Counter Input Function (Maximum signal frequency 3 kHz)
– Keep/Discard Counter Value when Power-off
– Supports Frequency Input Function (Maximum frequency 3 kHz)
– Supports Inverted DI Status

Relay Output
– Channels: 2 (Form A)
– Contact Rating
–120 V
–30 V
DC
– Relay On Time: 5 ms
– Relay Off Time: 6 ms
– Insulation Resistance: 1 GΩ min. @ 500 V
– Dielectric Strength
– Between Contacts: 1000 V
– Between Coil to Contact: 1500 V
– Maximum Switching: 60 operations/minute
– Supports Pulse Output
– Supports High-to-Low and Low-to-High Delay Output
Note! The analog input channels of the WISE-4012E do not support 50/60 Hz
noise rejection. The following methods can help to reduce noise:



WISE-4000 User Manual
DC
DC
1: Close to GND
@ 0.5 A
AC
@ 1A
AC
Power up WISE-4012E by power bank
Supply sensor power by battery
Wiring V0- and V1- pin to GND pin
DC
(1min)
(1min)
AC
20