Table of Contents
Advertisement
Technical Manual
Motion Detector/Automatic Switch 55/63
Via correction lux value, the measured lux value is shifted by an adjustable percentage offset. Thus,
with a set value of -50%, the measured value is reduced by 50%. Thus, with a measured value of 400
lux and a correction value of -50%, the presence detector would output the value 200.
Furthermore, the sending conditions for the measured brightness value can be defined. This can be
sent both at a specific change of (value in %) and cyclically at specific intervals.
The following table shows the relevant communication object:
Number Name/Object Function
97
Brightness – Measured value
Table 47: Communication object – Brightness
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
53
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
Series .02
Length
Usage
2 Byte
Sending the current measured brightness value
Advertisement
Table of Contents
