Technical Manual
Motion Detector/Automatic Switch 55/63
2.2 Connection diagram
Figure 1: Connection diagram
2.3 Structure & Handling
The following picture shows the structure of the MDT Motion Detector/Automatic Switch (with the
example of SCN-BWMxxT.x2):
Figure 2: Overview – Hardware module
1 = KNX bus connection terminal
3 = LED red
5 = Brightness sensor
7 = Sensor buttons (only SCN-BWMxxT.x2)
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
5
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
Series .02
2 = Programming button
4 = LED white
6 = LED green
S1/S2 = Sensor 1/Sensor 2