Table of Contents
Advertisement
Technical Manual
Motion Detector/Automatic Switch 55/63
4.5 Buttons
Buttons only available with SCN-BWM55T.G2 and SCN-BWM63T.02!
For the SCN-BWMxxT.x2 versions, two buttons are available on the unit. Using these buttons,
functions such as switching, dimming, blinds or sending a value can be carried out - both individually
and in groups - as well as internal functions that relate to the switchover to manual mode or
lock/forced operation.
In the "Buttons" menu, the function of the buttons is selected first. Selection is as follows:
ETS-Text
Function Buttons
Table 23: Settings – Function Buttons
4.5.1 Two-button function
For all functions, the "Time for long keypress" can be set via parameters.
When selecting "Two-button function", the functions switch, dimming, blinds/shutter are available.
The individual functions are described below:
4.5.1.1 Basic function – Switch
Two-button function
With the two-button function, the respective value (On/Off) can be assigned to the left and the right
button. The following picture shows the available settings:
Figure 23: Settings – Two-button function: Switch
The following table shows all available settings:
ETS-Text
Button assignment
(left/right)
Table 24: Settings – Two-button function: Switch
The following table shows the available communication object:
Number Name/Object Function
131
Buttons left/right – Switch On/Off
Table 25: Communication objects – Two-button function: Switch
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
40
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
Dynamic range
[Default value]
▪
not active
▪
Two-button function
▪
Single -button function
▪
internal function/ (Light channel 1)
Dynamic range
[Default value]
▪
ON / OFF
▪
OFF / ON
Length
1 Bit
Series .02
Comment
Setting the button assignment
(left/right button).
Comment
Setting the button assignment for
the direction (brighter/darker).
Usage
Switching function of the buttons
Advertisement
Table of Contents
