Basic Function - Dimming - MDT Switch 55 Technical Manual

Technical Manual
Motion Detector/Automatic Switch 55/63
4.5.1.2 Basic function – Dimming
 Two-button function
The following picture shows the available settings:
Figure 24: Settings – Two-button function: Dimming
The following table shows all available settings:
ETS-Text
Button assignment
(left/right)
Table 26: Settings – Two-button function: Dimming
The two-button function "dimming" can be set either as brighter/darker or as darker/brighter. The
relationships are shown in the following table:
Button
Dimming function
Switching function
Table 27: Functionality – Two-button Dimming
The dimming function is a start-stop dimming, i.e., as soon as the dimming function becomes active,
a bright or dark command is assigned to the input until it is released. After release, a stop telegram is
sent, which ends the dimming process.
The following table shows the available communication objects:
Number Name/Object Function
131 Buttons left/right –
Dimming On/Off
132 Buttons left/right –
Dimming relative
Table 28: Communication objects – Two-button function: Dimming
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
41
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
Dynamic range
[Default value]
▪
brighter/darker
▪
darker/brighter
Function brighter/darker
Button left Button right
brighter darker
ON OFF
Length
1 Bit
4 Bit
Series .02
Comment
Setting the button assignment for
the direction (brighter/darker).
Function brighter/darker
Button left
darker
OFF
Usage
Switching command for the dimming function
Command for relative dimming
Button right
brighter
ON