Door And Side Panels - KitchenAid KSBP25IVSS Installation Instructions Manual

Opening Dimensions
Height dimensions are shown with the leveling legs extended
to the minimum height of
NOTE: When leveling legs are fully extended to 1" (25 mm)
below the refrigerator, add
dimensions.
Minimum fixed wall position is 13 " (34 cm) from the freezer
door and 16 " (42 cm) from the refrigerator door.
13 "
(34 cm)
Model Size
Standard Cabinet
23' (654 L) 69" (175.3 cm)
25' (694 L) 72" (182.9 cm)
*For full-overlay cabinet doors with a trim kit, the opening height
must be adjusted as shown.
Door Swing Dimensions
Location must permit doors to open to a minimum of 150°. Allow
13 " (34 cm) minimum space between the side wall and the
freezer side of the refrigerator. Allow 16 " (42 cm) minimum
space between the side wall and the refrigerator side.
NOTE: Dimensions may vary based on model.
13 "
(34.5 cm)
2 "
(6.6 cm)
41 "
"
(106 cm)
(12.7 mm)
90˚
4
" (6.35 mm) below the refrigerator.
" (19 mm) to the height
36"
(91.5 cm)
16 "
(42 cm)
A
Height A Height A
Full-overlay*
69 " (175.6 cm)
" (183.2 cm)
17"
(43.0 cm)
0"
(0.1 mm)
150˚
Factory Door Panels and Side Trim Kits
All factory parts are available through your Whirlpool dealer or by
calling Whirlpool Parts and Accessories at 1-800-442-9991. In
Canada, call 1-800-807-6777.
Decorator Door Panel Kits
Decorator door panel kits are available only for models with
factory-installed trim kits. Follow the kit instructions for installing
the panels.
NOTE: Door panel kits are not required for factory-installed
stainless steel models.
Color
White
Black
Biscuit
Stainless Steel
Cabinet Side Trim Kits
Cabinet side trim kits are available to customize refrigerator to
cabinet face. Follow the kit instructions for installing the side trim.
Color
White
Black
Biscuit
Stainless Steel
Cabinet Side Panel Kits
Cabinet side panel kits are available to customize the exposed
side of the refrigerator. Follow the kit instructions for installing the
side panel.
Color
Stainless Steel
Custom Door Panels
If you plan to install custom wood panels, you will need to create
the panels yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawing for panel specifications.
IMPORTANT: Panels weighing more than the recommended
weight may cause damage to your refrigerator. Door panels
should not exceed the weights listed in the following table.
Model Size
23'
(654 L)
25'
(694 L)
45 "
(115.6 cm)
Flat panels:
You can create a custom flat panel a maximum of
thickness to replace your decorator panels. Flat wood panels less
than " (6.35 mm) thick are not recommended.

Door and Side Panels

23' Model
#4396762
#4396763
#4396764
#4396765
23' Model
#4396771
#4396770
#4396769
#4396768
23' Model
#4396748
Refrigerator
Door Panel Weight
28 lbs
(12.7 kg)
30 lbs
(13.6 kg)
25' Model
#4396758
#4396759
#4396760
#4396761
25' Model
#4396789
#4396790
#4396791
#4396792
25' Model
#4396749
Freezer
Door Panel Weight
16 lbs
(7.3 kg)
17 lbs
(7.7 kg)
" (6.35 mm)