Using Your Induction Hob; To Start Cooking - Bertazzoni P603I30NV Installation And Use Instruction

Using your Induction Hob

To start cooking

1. Touch the ON/OFF key (C) for 3 seconds.
After power on, the buzzer beeps once; all displays show "
- " to indicate that the induction hob has entered standby
mode.
2. Place a suitable pan on the cooking zone that you
wish to use.
Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
3. Press the zone select key (A) for the heating zone with the pan on it. The selected 0
symbol will remain fully lit.
4. Adjust the heat setting by touching the slider control (D).
• If you do not choose a heat setting within 1 minute, the Induction hob will automatically
switch off. In this case, you will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
8