Planmeca Compact i Classic Quick Manual page 4

Programming
Control panel
Patient chair autoposition settings
Move chair to required position
Unit settings
Start programming
Planmeca Solanna operating light settings
Start programming
Instrument settings
Activate instrument Start programming
*Unit functions
Duration of cup filling
2 - 10 sec.
**Operating light functions
Intensity
30 - 100%
***Instrument functions
Spray water
0 (off) - F=100 (full)
Spray air
0 (off) - F=100 (full)
www.planmeca.com
Switch operating
Start programming
light On/Off
Select function*
Select operating light
Select function***
Duration of bowl rinsing
5 - 240 sec.
White light tone
Warm > Neutral > Cool
Chip blow water
0 (off) - F=100 (full)
Chip blow air
0 (off) - F=100 (full)
For detailed instructions, please see the user's manual. Copyright Planmeca. Rights for changes reserved.
Press desired button where to
store chair position
Adjust value
Adjust/select value**
Adjust value
Accept new
autoposition
Accept new value
Accept new value
Accept new value
Duration of door open/
assistant call signal
0 - 250 sec.
Maximum brightness
Mild > Strong > Glaring
Intensity of instrument light
L. oFF (off), 70 - 100%
Duration of polymerisation
cycle
5 - 100 sec.