Related Manuals for Godex T-10
Summary of Contents for Godex T-10
- Page 2 :Rev. B :2018.09.18 :313-041000-403...
- Page 3 Box Contents Getting to Know Your T-10/T-20 Rewinder Device Overview Setting Up the Rewinder Connection Loading the Label Install the Plate Remove the Plate Label Core in Different Sizes Match Up the Empty Label Core and Core Adapter The Modes of Rewinding What’s the Status of the Rewinder...
- Page 8 Tighten to lock...
- Page 9 Install LOCK Remove LOOSEN...
- Page 14 Holding on the Dancer Arm Holding on the Dancer Arm Orange Orange...
- Page 15 To Set up: 1. Make sure the power is switched off. 2. Place the Dancer Arm at its highest point on either side of the rewinder. 3. Turn on the power while holding on the Dancer Arm. Once the power is on, an orange light should light up and that will bring the rewinder into the “Motor Fixed Speed Mode.”...
-
Page 16: Led Indicator
LED INDICATOR... - Page 22 Model T10 Label Rewinder Paper width 4.72” (Max) Auto mode : 14 IPS (MAX) Rewind Speed Fixed : 2~15 IPS Label Roll 8” (Max.) Coreless 1” (25.2 to 25.6 mm) Core Roll 1.5” (37.4 to 38 mm) 1.5” (40 to 40.6 mm) 3”...
- Page 23 Model T20 Label Rewinder Paper width 7 ” (Max.) Auto mode : 14 IPS (max) Rewind Speed Fixed : 2~15 IPS Label Roll 6” (Max.) Coreless 1” (25.2 to 25.6 mm) Core Roll 1.5” (37.4 to 38 mm) 1.5” (40 to 40.6 mm) 3”...