Changing Parameters; Commissioning - GEM mFlow 3030 Quick Manual

4

Changing parameters

The keys are used for the GEMÜ
3030 Flow to select the various menus.
m
When changes to the parameters are
required brackets are put around the values.
Use the or key to move the cursor onto
the respective parameter and change it with
the or the keys.
Example:
Changing the measurement unit from l/h to
l/min
5

Commissioning

The GEMÜ 3030
calibrated at the factory and therefore ready
for operation when the operating voltage is
connected.
The following settings are necessary:
Set measurement unit (SetBasics / Unit)
G
Enter mains frequency (SetBasics /
G
F.Line)
Set analogue output
G
(SetFunction / Analog Output)
Determine function of relay outputs
G
(SetFunction / Digital Output)
Enter type and size of fi tting
G
(SetCalibration / Pipe)
11 / 20
Flow fl owmeter is
m
3030