Table of Contents
Advertisement
BACnet
®
Gateway for VRF System
9 AC Unit Types compatibility
VRF Gateway for VRF System is compatible with units that are later than VRF-II series.
10 Mechanical & electrical characteristics
Enclosure
Mounting
Power
Terminal wiring
Power supply and
low-voltage signals
Ethernet port
Port A LON
USB port
Battery
LED indicators
Operational
temperature
Operational
humidity
Preservation
Temperature
Protection
RoHS conformity
Material: Plastic, type PC (UL 94 V-0)
Dimensions: 270mm x 176mm x 60mm
Weight: 1.2 Kg
Color: Light Grey RAL 7035
Wall recommended
Screw terminal block for power connection (3 poles)
208 to 240VAC
50 to 60Hz
4.6W max.
Per terminal: solid wires or stranded wires (twisted or with ferrule)
1 core: 0.5 ... 2.5mm
2
2 cores: 0.5 ... 1.5mm
3 cores: not permitted
Connector:
RJ45 for shielded cat5 or higher class cable
Communication speed:
10/100 Mbps
Communicates with:
BACnet IP network
PC for gateway configuration
A1 A2 (2 poles screw terminal)
Signal Ground
A3 A4 (2 poles screw terminal)
Fujitsu VRF network connection
Mini Type-B receptacle connector and USB 2.0 compliant
Only for gateway configuration and diagnostic
1500VDC isolation from others ports
Size: Coin 20mm x 3.2mm
Capacity: 3V / 225mAh
Type: Manganese Dioxide Lithium
1 x Power
1 x Error
0°C to +46°C
5% to 95%, non-condensing
-10°C to +60°C
IP20 (IEC60529).
Compliant with RoHS directive (2002/95/CE).
Copyright© 2010-2017 Fujitsu General Limited - All rights reserved
2
INSTRUCTION MANUAL r1.3.2 eng
98/103
Advertisement
Table of Contents
