Fujitsu BACnet UTY-VBGX Instruction Manual page 94

BACnet ® Gateway for VRF System
Signals
Check the current available signals according to the units configured on the configuration tab (see section 8.4.3).
1. Signal number: Configuration Tool internal reference.
2. Active: Indicates if the signal is currently active for this configuration. If not, it will not be considered by
the tool when downloading it to the gateway.
3. Object BACnet name: Signal's descriptive name that identifies the signal.
4. BACnet type: Type of BACnet object.
Figure 8.9 Units scan on the FGL bus
Figure 8.10 Signals' Viewer
Copyright© 2010-2017 Fujitsu General Limited - All rights reserved
INSTRUCTION MANUAL r1.3.2 eng
94/103