Table of Contents
Advertisement
ET35 Series Digital Bridges（LCR）Operating Instructions
V. Save / call
By the save / recall function, the user can not only save the configuration and
measurement results to the internal memory of ET35 or external USB memory, but can
recall them from the internal memory of ET35 or external USB memory.
Methods of saving and the purposes
Methods of saving
Type
Configuring saved
(internal memory)
Configuring saved
(USB memory)
Data saved (USB
memory)
Screen saved (USB
memory)
File folder/ file structure on the USB memory
To save the information to the USB memory, the predefined plan will be used to
organize the file folder and files on the memeory
File folder
Maximum
number of files
data
pic
cfg
Notes to USB Memory
The following matters should be paid attention to when ET35 is used with the USB
memory:
Use the USB memory with interface USB2.0
Use the USB memory with mass storage capacity which complies with FAT16
or FAT32 standard, and format it with the FAT16 or FAT32 format standard
Use ET35 dedicated USB memory. Otherwise, the data previously saved in
USB memory may be erased
If the file cannot be saved to or recalled from USB memory, other USB
memories can be used
Hangzhou Zhongchuang Electron Co., Ltd.
File format
(.cfg)
(.cfg)
CSV format
(.csv)
GIFformat
(.png)
999
Including the measurement result such as .csv files
999
Including the snapshots of the screen such as .gif files
999
Including the configuration status of the instrument
Callable
Save the configuration of
Yes
ET35 to the internal memory
Save the configuration of
No
ET35 to the USB memory
No
Save the measurement
results to the USB memory
No
Save the snapshot of
the screen to the USB
memory
Description
75
Purposes
Advertisement
Table of Contents
