Table of Contents
Advertisement
ET35 Series Digital Bridges（LCR）Operating Instructions
4.5 Self correction
ET35 supports Self correction. The measurement errors of the instrument are
corrected with the Self correction function so as to enhance the accuracy of the
instrument.
The steps of Self correction:
1. Press the [System] key.
2. Press the [Self corre] function key to enter the Self correction page.
3. Press the [Enter] key key to start the system self correction.
As shown below
Self correction starts
Self correcting
Self correction completed
Hangzhou Zhongchuang Electron Co., Ltd.
73
Advertisement
Table of Contents
