Introduction To The Front Panel - East Tester ET3501 Operating Instructions Manual

ET35 Series Digital Bridges（LCR）Operating Instructions

2.2 Introduction to the front panel

(1) Power switch
It is used to select the status of ET35 power supply (power on or power off). When
power is on, the switch is yellow-white, and all operating voltages are applied to the
instrument. When power is off, the switch is dark red, and no voltage is applied to the
instrument.
(2) 7-inch color screen
7-inch color screen displays measurement results, the test conditions, etc.
(3) Function keys
There are six function keys which are used to select the measurement conditions and
parameters. There is a mark on the left of each function key.
(4) Shortcut keys
There are six shortcut keys which are used to quickly select the measurement
conditions and parameters.
[MODE] key
measured objects
[FREQ] key
[SPEED] key
[LEVEL] key
[RANGE] key
[BIAS] key used for the selection and setting of internal voltage
(5) Menu keys
Menu keys are used to obtain the appropriate selection of instrument control.
[Display Format] key
Hangzhou Zhongchuang Electron Co., Ltd.
used for the selection and setting of the combination mode of the
used for the selection and setting of the measuring signal frequency
used for the selection and setting of the measuring speed
used for the selection and setting of measuring signal level
used for the selection and setting of range mode
display the measurement results.
4