Table of Contents
Advertisement
System configuration and system status (web interface)
6.3 System
Log files
Press this button to download the log files of the device as compressed zip archive. The
archive contains the "long-term log" as well as the "detail log".
Current configuration
You can export, import or reset the configuration of the device to the default values. A
configuration includes all system settings, except for the PROFINET parameters, such as the
IP address or PN name and the user administration including the passwords. To prevent
compatibility problems, we recommend you only swap configurations between devices with
the same firmware.
Measured values / Runtime data
By pressing the Download button, you can download the measured values of the Status
tables (Page 102) as .csv file for further analysis in a spreadsheet program. The file contains
all data of the currently connected slaves as well as the list of all slaves that have been
connected to the device since the last reboot. The list of devices that are not connected can
be deleted with the "Delete measured values of devices that are not connected" function.
The unique identification criterion of each entry here is the MAC address of the associated
PLB basic module.
Delete measured values of devices that are not connected
The Power Line Booster saves all measured values/runtime data of all devices that were
ever connected to it since the last reboot. You can view this data in the Status tables
(Page 102) in the area "Devices not connected". You use the function key to delete the list.
Log backup
In case of a fatal error, the Power Line Booster saves the log files retentively. Here you can
download the files or delete them from the system. After deleting the files, the note on Errors
and warnings (Page 81) will disappear.
GSD file
You use this Download button to download the current GSD file of the device to use it in TIA
Portal/Step 7.
90
Operating Instructions, 11/2019, A5E36203125A-AG
Power Line Booster
Advertisement
Table of Contents
