Table of Contents
Advertisement
Introduction
1.1
Preface
Purpose of the manual
This manual describes the hardware and software components of the Power Line Booster
system (PLB system).
This manual provides information based on the requirements as defined by DIN EN 82079-1
regarding mechanical engineering documentation. This information relates to the place of
use, transport, storage, installation, use and maintenance.
Target group
This manual is intended for:
● Installation personnel
● Configuration engineers
● Operating personnel
● Maintenance personnel
Required knowledge
General knowledge in the area of automation engineering is required to understand this
manual.
Experience in the use of PROFINET is also helpful.
1.2
System overview and introduction
The Power Line Booster system is a communication system for data transmission on
conductive media. The system provides Ethernet-based communication connections
between stationary plant controllers and mobile plant units. The media can be sliding contact
systems, such as in electric overhead conveyors, or flexible cables, such as the ones used in
crane systems.
The Power Line Booster is designed for operation in industrial environments.
The PLB system has the following basic properties:
● It transmits Ethernet signals from a plant controller (e.g. SIMATIC CPU or controller) to up
to 50 communication devices. In case of real-time requirements (e.g. for
PROFINET/PROFIsafe), we recommend a maximum of 40 devices per master.
● It prioritizes cyclic PROFINET telegrams to ensure real-time conditions.
Power Line Booster
Operating Instructions, 11/2019, A5E36203125A-AG
1
7
Advertisement
Table of Contents
