4.13
Installation
4.13.1
Power Line Booster (PLB BM)
Install the Power Line Booster onto a vertically mounted DIN rail (TS 35; DIN Rail) (see
photo).
Figure 4-9
If you plug the Power Line Booster onto a vertical DIN rail or one installed horizontally,
however, the maximum permissible ambient temperature is reduced to 50 °C.
You must always keep a clearance of 60 mm above and below the Power Line Booster.
Power Line Booster
Operating Instructions, 11/2019, A5E36203125A-AG
PLB mounted on a DIN rail; rear view
Plant installation
4.13 Installation
61