Siemens SIMATIC Power Line Booster Operating Instructions Manual page 33

If you need cable lengths of > 1 meter, you can, with reduced configuration limit, use high-
voltage and insulation-tested PLB cables with a length of 8 meters.
Table 2- 11
PLB cable
Without plug
With plug (male)
With two plugs (male + female)
The cables with plugs are fabricated with Harting HAN 3A EMC connectors.
Table 2- 12
Product
Add-on housing straight
Add-on housing angled
Socket insert (female)
Contact insert (male)
Crimp contact (female)
Crimp contact (male)
Crimp contact (female)
Crimp contact (male)
The connector enclosure must have a surface contact to the supporting metal surface. An
insulating seal is not allowed.
If even 8 meter cables are not sufficient, you can also use other shielded cables when taking
into account the electrical specifications. However, this results in a further reduction of the
configuration limit. This means you should only consider these cables in exceptional
situations.
Table 2- 13
Manufacturer
Lapp
Power Line Booster
Operating Instructions, 11/2019, A5E36203125A-AG
PLB cables of 8 meters in length
Use the following HAN® connectors from Harting
Type
HAN® 3 EMC
HAN® 3 EMC
HAN® Q 5/0-F
HAN® Q 5/0-F
HAN E®, 2.5 mm², gold-plated
HAN E®, 2.5 mm², gold-plated
HAN E®, 1.5 mm², gold-plated
HAN E®, 1.5 mm², gold-plated
PLB cable with flexible length (example)
Type
PROFIBUS cable
8 m length
6ES7903-1AH40-0AB0
6ES7903-1AH41-0AB0
6ES7903-1AH42-0AB0
Harting order number
09 62 003 0301
09 62 003 0801
09 12 005 3101
09 12 005 3001
09 33 000 6223
09 33 000 6123
09 33 000 6216
09 33 000 6116
Lapp order number
2170322
Device description
2.7 Accessories
33