48/56
Bosch Rexroth AG
Disassembly and exchange
Seeping hydraulic fluid
12
Disassembly and exchange
Only disassemble the component parts as far as is necessary to undertake
the required work. As a basic principle, all disassembled parts should be
professionally reassembled at the intended place.
12.1
Preparing disassembly
Ensuring safety:
As a basic principle you should observe the related instructions for the complete
machine. Unless otherwise specified in these instructions, complete the follow-
ing steps:
Carry out the decommissioning as described in chapter 11 of these operating
f
instructions.
Do not allow uninvolved persons to remain in the area concerned.
f
12.2
Disassembling the drive module
When disassembling you should perform the work steps described in Chap-
f
ter 7 "Assembly" but in reverse order.
Despite prior draining, hydraulic fluid will still seep out of the hydraulic line
f
system of the drive module and/or the hydraulic system. All line outlets should
therefore be closed using suitable plugs.
After disassembly is complete, you should observe the information in Chap-
ter 6 regarding safe transportation of the product.
Drive modules | RE 51150-B/07.11