Bosch Rexroth UPE2 General Operating Instructions page 27

RE 51150-B/07.11 | Drive modules
Tapped hole UPE5
Transporting the drive module
Fig. 10: Tapped holes for ring bolt at the UPE5 (eyebolt)
Screw the ring bolt (eyebolt) into the tapped hole until it is hand-tight.
f
Fasten a lifting strap or chain at the ring bolt.
f
Hang the lifting strap or chain to a crane hook.
f
Make sure that the lifting strap or chain cannot damage attachment parts dur-
f
ing lifting.
Lift the drive module slowly and carefully, taking into consideration the stable
f
center of gravity location in order to avoid oscillations of the drive module.
Ensure that the control modules of the drive module do not come into contact
f
with the lifting gear during transport.
Transport the drive module to the desired location.
f
Bosch Rexroth AG 27/56
Transport and storage