Table of Contents
Advertisement
RE 51150-B/07.11 | Drive modules
Danger due to insufficient fastening!
Risk of injury!
Always ensure a vertical installation position (UPE2).
f
Fasten the product using all screws according to the connection dimensions
f
specified in the relevant data sheet.
Hazard due to incorrect connection of the control and supply lines!
Unforeseeable reactions, risk of injury!
Ensure that only trained specialists are commissioned with the assembly.
f
Observe the circuit diagrams located at the device when assembling
f
the product.
2.7
Safety equipment
•
Make sure that all safety devices belonging to the drive module are present,
have been installed properly and are fully functional. Do not displace, bypass or
disable safety equipment.
•
If it should be necessary to disable any safety equipment temporarily, for
example for commissioning or maintenance work, always take the appropriate
measures to ensure that no hazard to a person's life or health or to property
may occur. Also observe the superordinate operating instructions for the ma-
chine or system.
2.8
Obligations of the machine manufacturer
In order to ensure safety when handling the drive module, the manufacturer of the
machine must:
•
Select the safest installation position for the drive module possible in order to
avoid possible damage of the drive module.
•
Provide for sufficient protection of the drive module including all attachment
parts depending on the selected installation position in order to avoid possible
damage of the drive module and its attachment parts.
•
Prescribe the wearing of personal protective equipment or perform suitable
protection measures in order to reduce the risk of collision, the risk of hear-
ing damage and the risk of burns at hot surfaces for operating or maintenance
personnel.
•
Label the hydraulic components according to the specifications of
EN 982, 7.3 et sqq.
•
Take suitable protective measures in order to reduce the slip hazard caused by
oily surfaces around the drive module.
Bosch Rexroth AG
CAUTION
11/56
Safety instructions
Advertisement
Table of Contents
