28/56
Bosch Rexroth AG
Transport and storage
Storage conditions
Storage up to 3 months
Storage longer than 3 months
Carefully set the drive module down again and remove the attachment devices.
f
6.1.5
Freight transport
The various regulations of the assigned forwarding agents e.g. shipping
companies, railway companies, forwarders, airlines must be observed.
Fasten the drive module on the transport vehicle, e.g. by lashing up, screwing
f
to the loading area or a pallet.
Ensure that the attached control modules of the drive module do not come into
f
contact with the attachment devices during transport.
6.2
Storing drive modules
For storing the drive module, you have to comply with the following environmen-
tal conditions:
Table 9: Storage conditions
Denomination
Temperature range
Relative humidity (no condensation)
UV protection
Condensation
Additional ozone formation close to the storage
No special preservation necessary.
Contact Bosch Rexroth for the preservation and later commissioning of the drive
module if the drive module must be stored for a period of more than three months.
Drive modules | RE 51150-B/07.11
Area
10 - 25 °C
Max. 65 %
100 %
None
None