Card Reader - HP OMEN 16-k0 Series Maintenance And Service Manual

1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the speakers:
1. Remove the two broadhead Phillips M1.5 × 2.5 screws (1) that secure each speaker to the computer.
2. Disconnect the speaker cables from the system board (2).
3. Remove the speakers from the computer (3) .
NOTE:
of or damage to these isolators can result in degraded speaker performance.
To install the speakers, reverse this procedure.

Card reader

To remove the card reader, use this procedure and illustration.
Table 6-5 Card reader description and part number
Description
Card reader
Card reader cable
Before removing the card reader, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the left speaker (see
Bottom cover on page
When removing the speakers, make note of the location of the rubber isolators (4). The absence
Bottom cover on page
Battery on page
Speakers on page
Preparation for disassembly on page
36).
Battery on page
Preparation for disassembly on page
36).
37).
40).
36).
37).
Spare part number
N14068-001
N14067-001
36).
Card reader 41