Table of Contents
Advertisement
f.
Pull the cable out of the connector (3).
g.
When installing a display panel, be sure to install the tape on the left and right sides of the display
back cover as shown in the following illustration.
Display panels are available as the following spare part numbers:
N13805-001—FHD, 250 nits, 144 Hz
N13805-001—FHD, 300 nits
N13805-001—FHD, 300 nits, 144 Hz
N13805-001—QHD, 300 nits, 165 Hz
Display panel adhesive is available as spare part number N12238-001.
9.
If you need to replace the camera module:
a.
Remove the two Phillips M2.0 × 3.0 screws (1) from top bracket, and then remove the bracket from
the display rear cover (2). The bracket is available as spare part number N14108-001.
NOTE:
In this procedure, the display assembly will not be connected to the computer.
Display assembly
59
Advertisement
Table of Contents
