Table of Contents
Advertisement
2.
Remove the board (2).
To install the lighting board, reverse this procedure.
Display subcomponents (without removing the display)
You can remove some display subcomponents without removing the entire display assembly from the
computer. To remove the bezel, display panel, and camera module, use these procedures and illustrations.
Table 6-7
Display subcomponent descriptions and part numbers
Description
Bezel
Display panel, FHD, 250 nits, 144 Hz
Display panel, FHD, 300 nits
Display panel, FHD, 300 nits, 144 Hz
Display panel, QHD, 300 nits, 165 Hz
Top bracket
Camera module
Before removing the display subcomponents, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the display subcomponents:
1.
Open the computer and place it with the display sitting on the table and the keyboard positioned
vertically.
Preparation for disassembly on page
Bottom cover on page
36).
Display subcomponents (without removing the display)
36).
Battery on page
37).
Spare part number
N14102-001
N13805-001
N13806-001
N13807-001
N13808-001
N14108-001
N14112-001
43
Advertisement
Table of Contents
