Checking Information - Viessmann VITOVALOR PT2 Operating Instructions Manual

Fuel cell based micro chp system with integral gas condensing boile
Table of Contents

Advertisement

Checking information

Subject to the components connected and the settings
made, you can check current temperatures and oper-
ating conditions.
Information in the information menu is split into groups:
General
Heating circuit 1
Heating circuit 2
Heating circuit 3
Heating circuit 4
DHW
Fuel cell
Burner
Internet
Service contact details
Open source licence
Note
If heating circuits have been named (see chapter
"Naming heating circuits") the assigned name is dis-
played.
Detailed options for checking the individual groups can
be found in chapter "Checking options".
Calling up the contact details for your heating contractor
Tap the following on-screen buttons:
1.
2. "Information"
Checking service messages
Your heating contractor can set service intervals (lim-
its) (e.g. for burner hours run). A service message is
generated when the service intervals are exceeded.
Service messages for the fuel cell are reported auto-
matically.
If your micro CHP system is due for a service, this is
indicated on the display with the
ice". If available, your heating contractor's contact
details will be displayed.
Tap
.
flashes in the footer.
Calling up a service message
1. Tap on
in the footer.
The service message appears in yellow in a list.
Tap the following on-screen buttons:
1.
2. "Information"
Reading the internal electricity meter
The internal electricity meter is located above the pro-
gramming unit behind the front panel. See page 22.
1. Pull the upper front panel upwards.
2. Read the value from the electricity meter.
3. "Service contact details"
2. Notify your heating contractor.
symbol and "Serv-
3. Tap "Service messages".
The displayed value is required for reimbursement
from the power supply utility.
Note
If no details have been entered, see page 33.
If your micro CHP system also has fault messages
to display, the following will appear after tapping on
:
"Faults", "Service messages" and any other
messages.
The service messages appear in yellow in a list.
Note
If the service cannot be carried out until a later
date, the service message will be displayed again
the following Monday.
Checks
37

Advertisement

Table of Contents
loading

Table of Contents