Enter License Key; Show The Instrument Information; Section 7 Maintenance - Hach SC4500 User Manual

4. Connect to your Claros account and provision the controller. Follow the steps in the Claros
interface.
Note: Contact Hach to learn more about Claros or to get a Claros account.
Note: Sensor measurements may go out of view until the controller is successfully provisioned to Claros. If the
controller is disconnected from Claros, make sure to set the Claros button to off to show sensor measurements
on the display.
When the Claros configuration is complete, the Cloud icon shows on the status bar of the main
screen.

6.9 Enter license key

Enter a license key to upgrade the controller software with new functions (e.g., Prognosys, Modbus
TCP, RTC-ORP).
Enter the license key as follows:
1. Push the main menu icon, then select Controller > License.
2. Select one option:
Option
Enter license keys
Activated license keys
3. Enter the license key. Push OK.
Note: Contact the manufacturer or a sales representative to get a license key.
A message shows if the upgrade is correct.

6.10 Show the instrument information

Shows information about the controller and connected SC sensors. Shows the controller connection
status.
1. Push the main menu icon, then select Information.
2. Select an option.
Option
Controller details
SC Devices
details
Connectivity
status

Section 7 Maintenance

Do not disassemble the instrument for maintenance. If the internal components must be cleaned or repaired,
contact the manufacturer.
Description
Enters a license key to upgrade the controller.
Shows a list with the activated software on the controller.
Description
Shows the controller serial number, installed software package, the user-defined facility
and location of the controller.
Shows the data for the connected devices (e.g., 4–20 mA inputs, relays, digital sensors,
digital analyzers and expansion modules). Shows the device type, serial number,
firmware and Claros status.
Shows the network condition based on the controller connectivity.
• Claros—Shows if the controller is successfully connected to the internet and Claros.
• Wi-Fi—Shows if the controller is successfully connected to internet using Wi-Fi
connectivity. If there is an error, shows possible causes and solutions.
• Cellular—Shows if the controller is successfully connected to internet using Cellular
connectivity. If there is an error, shows possible causes and solutions.
• LAN—Shows the connection condition and the MAC and IP address of each
configured Ethernet port.
N O T I C E
English 43