Table of Contents
Advertisement
Other cooking Smart Programmes
Sauté
Sauté can be used in place of a frying pan, griddle or flat-top grill.
Default.time
Time.range
30 minutes
1 minute to 1 hour
(00:30)
(00:01 to 01:00)
Stage 1: Setting up the Duo Plus for
sautéing
01 Insert the inner pot into the multi-
cooker base. Do not use a lid.
02 3L & 5.7L only: Secure the power
cord to the base power socket on the
back of the multi-cooker base. Make
sure the connection is tight.
All sizes: Connect the power cord
to a 220-240V power source.
The display shows OFF.
03 Press Sauté.
04 Use the - / + Time buttons to adjust
the cooking time.
Cooking time and temperature level
adjustments are saved to the Smart
Programme when cooking begins.
05 Use the Temp / Pressure
buttons to select a Low, Med
or High temperature.
06 Press Start to begin. The multi-cooker
displays On to indicate that it has
begun heating.
The Sauté Smart Programme reaches high temperatures. If unmonitored, food
may burn on this setting. Do not use the lid and do not leave your multi-cooker
unattended while using Sauté.
Default..
Temperature.
temperature
range
Low
High
Med
High
Stage 2: Sautéing
07 When the display switches from On
to Hot, add your recipe ingredients.
If recipe ingredients are added before
the Hot message appears, it may not
appear at all. This is normal!
08 If you finish sautéing before the timer
runs out, press Cancel. Otherwise,
when cooking finishes the display
shows End.
Delay Start and Automatic Keep Warm
are not available on the Sauté Smart
Programme.
WARNING
Notes.and.tips
Simmering,.thickening,.and.
reducing.liquids.
Pan.searing.or.sautéing.
Stir-frying.or.browning.meat.
instantpot.com.au | 31
Advertisement
Table of Contents
