Emerson E2 Quick Start Manual page 7

3. Select the COM port the device is connected to, press
MODBUS selection.
4. Set the Baud Rate for the chosen port. Press
Document Part # 026-4953 Rev 0 07-NOV-2014
©2014 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use.
Visit our website at http://www.emersonclimate.com/ for the latest technical documentation and updates.

Figure 8 - MODBUS Port Selection

to look up the appropriate speed.
Figure 9 - Baud Rate Selection
(LOOK UP) and select the appropriate
Page 7 of 9