Table of Contents
Advertisement
UI Element
Apply
STANDBY
UI Element
Standby
Manual
Auto
Delay Time (0~30 min)
Apply
Video
HDMI OUT RESOLUTION
Hall Technologies
August 22, 2022
Description
Click to perform settings.
Description
Set the device to standby or to wake up from the standby status.
Ÿ
On: Set the device to standby status manually.
Ÿ
Off: Set the device to wake up from standby manually.
Ÿ
On: Enable automatic standby function for the device.
Ÿ
Off: Disable automatic standby function for the device.
Set a period of time that remains before the countdown timer begins for auto
standby.
•
For example, when the current input is Guide Screen, 1 minute means if there's
no signal present at the device in 1 minute, the countdown timer for device
standby begins; when the timer ticks to zero, the device enters standby mode.
Note: If the connected display doesn't support CEC or isn't correctly set with
RS232 commands, the word "Standby" appears in the middle of the Guide
Screen.
•
If it's set to 0 minute, it means this function is disabled, you cannot set the
device to standby mode.
By default, auto standby is set as 1 minute.
Click to perform settings.
Page 22 of 30
Advertisement
Table of Contents
