Standby - Hall Technologies HT-ODYSSEY User Manual

UI Element
CEC
Power On
Power Off
CEC Edit
Command Testing
Display On
Display Off
Apply

STANDBY

UI Element
Standby
Manual
Auto
Delay Time (0~30 min)
Hall Technologies November 8, 2022
Description
Set display on or off through CEC commands.
Click to power on the connected display through CEC command.
Click to power off the connected display through CEC command.
Select the desired method for sending CEC commands. Options for sending
commands are either HDMI Out or HDBT Out.
To test a command, enter the command string into the Command Testing field and
hit "Send".
Enter the CEC Display On command string of your display and click "Save". (For
more information about the command, see the user guide of your display.)
By default this field is set as blank.
Enter the CEC Display Off command string of your display and click "Save". (For
more information about the command, see the user guide of your display devices.)
By default this field is set as blank.
Click to apply setting changes.
Description
Set Standby mode settings.
Ÿ On: Set the device to standby status manually.
Off: Set the device to wake up from standby manually.
Ÿ
On: Enable automatic standby function for the device.
Ÿ
Off: Disable automatic standby function for the device.
Ÿ
Set a period of time that remains before the countdown timer begins for auto
standby.
•
For example, when the current input is Guide Screen, 1 minute means if there's
no signal present at the device in 1 minute, the countdown timer for device
standby begins; when the timer ticks to zero, the device enters standby mode.
Note: If the connected display doesn't support CEC or isn't correctly set with
Page 22 of 30