Screen Mirroring; Screen Mirroring Over Airplay - Hall Technologies HT-ATLAS User Manual

o If last selected wired source is not active, the device will check the other wired
source. If it is active, the device will switch to the source and show it on the screen.
o If there's no active source, it will show Guide screen on the display, after 1 minutes,
the device will send CEC power off command to turn off the sink display and its
power LED is weak breathing lighting.
Note: If new source replaces the current wireless source (HT-Voyager / Airplay / Miracast, Smart
View), the current wireless source is disconnected with the device.

SCREEN MIRRORING

With screen mirroring support, the device allows users to wirelessly share multimedia from their
devices on any HDMI displays. Screen mirroring can be performed over Airplay, Miracast, Smart
View and HT-Voyager.

1. Screen mirroring over airplay

Take iPhone 8 (iOS 15.2) for example:
1. Connect your iPhone to the soft AP of the device.
ð Soft AP SSID: as same as the device name and can be obtained from OSD at the upper
right of the display screen. By default, it is set as HT-ATLAS.
ð Password: set through Web UI or Telnet API and can be obtained from OSD at the
bottom right of the display screen. By default, it is set as 12345678.
2. Slide up from the bottom of the iPhone's screen to show the control center. Click Screen
Mirroring and choose the device name in the pop-up list.
Hall Technologies August 22, 2022 Page 10 of 30