Cec - Hall Technologies HT-ATLAS User Manual

UI Element
Auto
Apply

CEC

UI Element
CEC
Power On
Power Off
CEC Edit
Command Testing
Display On
Display Off
Hall Technologies August 22, 2022
Description
When an access code is configured, it appears on the upper right corner of the
Ÿ
display.
Ÿ If you don't want to set access code, you can enter nothing here.
By default, it's set as blank.
When "Auto" is checked, the device randomly generates a four-digit access code in
the following cases:
Ÿ The device switches to Guide Screen.
Ÿ The device reboots.
Click to perform settings.
Description
Set display on or off through CEC commands.
Click to power on the connected display through CEC command.
Click to power off the connected display through CEC command.
Configure CEC Display On and Off commands for passing through them to HDMI
Out and/or HDBT Out port.
Enter the CEC command of a controlled display device for click "Send" to test if it
is available before you enter it in Display On and Display Off.
Enter the CEC Display On command of a controlled display device and click "Save".
For more information about the command, see the user guide of your display
devices.
By default, it's set as blank.
Enter the CEC Display Off command of a controlled display device and click
"Save". For more information about the command, see the user guide of your
display devices.
By default, it's set as blank.
Page 21 of 30