Table of Contents
Advertisement
Note:
When the device outputs Guide Screen picture, the OSD will be displayed all the time.
•
When the device outputs specific video sources, the OSD will be displayed on the display
•
device's screen for 10 seconds and then disappear.
•
By default, the access code is set as blank, therefore the OSD doesn't display the access
code. If you want to set access code, see
Web UI
The Web UI designed for this device allows for basic controls. It can be accessed through a
modern browser, e.g. Chrome, Safari, Firefox, IE10+, etc.
To get access to the Web UI:
1. Connect the LAN port of the device to a local area network. Ensure there's a DHCP server in
the network so that the device can obtain a valid IP address.
2. Connect the PC to the same network as the device.
3. Input the device's IP address in the browser and press Enter, the following window pops up.
Hall Technologies
August 22, 2022
BYOD
section for more information.
Page 17 of 30
Advertisement
Table of Contents
