UI Element
Network
IP Mode
IP Address
Subnet Mask
Default Gateway
DNS Server 1
DNS Server 2
Apply
WI-FI SETTINGS
UI Element
Mode
Channel
Apply
Hall Technologies
August 22, 2022
Description
For network settings in the device's LAN port.
Select an IP mode from DHCP and Static.
By default, it's set as DHCP.
Set IP address manually for the device when Static mode is selected.
Set subnet mask manually for the device when Static mode is selected.
Set gateway address manually for the device to communicate with another
network that uses different communication protocols when Static mode is
selected.
Set DNS server manually for the switcher to ensure normal network
communication.
Click to perform settings.
Description
•
5G: Configure the device's frequency band as 5GHz.
•
2.4G: Configure the device's frequency band as 2.4GHz.
By default, the device works at 5GHz. If your wireless devices don't support 5GHz
Wi-Fi, configures the frequency band as 2.4G before connecting them to the device
via Miracast.
Configure the wireless channel for the device.
By default, it is set as Auto. Auto means the device select a wireless channel
automatically for itself.
Click to perform settings.
Page 19 of 30