Connect The Power Supply And Usb Cable; Configure The Module - Sierra Wireless MC5720 Quick Start Manual

M i n i C a r d U n i ve r s a l D e v e l opment Kit Quick Start Guide

Connect the power supply and USB cable

To install the power supply and USB cable:

Configure the module

The daughterboard includes several switches and jumpers that you can use to
configure the module's operation, as detailed in Tables 2 through 5.
1 0
1. Place the daughterboard face-up.
2. Insert one end of the USB cable into the USB connector (beside the Mini
Card) – the other end connects to your development computer (DO NOT
connect it yet).
3. Insert the power supply into the daughterboard's power supply connector
(beside the USB connector) – the other end connects to a standard power
outlet.
2 1 3 0 6 7 7