Insert the Mini Card
After inserting the USIM card, insert the Mini Card:
1 .1C Apr- 06
3. Insert the USIM card with its circuitry facing the daughterboard – line up
the notch in the card with the notch in the slot.
4. Close the USIM casing.
1. Place the daughterboard face-up – the Mini Card slot is beside the USB
connector.
2. Remove the two screws that are located on the metal strips near the
antenna end of the board.
3. Hold the Mini Card at the screw holes and slide it into the
daughterboard's Mini Card slot at a 45-degree angle.
S e t up a nd i ns ta l la t ion
7