Development Kit User Guide
Rev 2.0 Apr.20
WAKE UP
The WAKE UP pushbutton wakes the module up.
Figure 3-9: WAKE UP Button
Table 3-9: WAKE UP Button Details
Component
Button
NRESET
The NRESET pushbutton reboots the module.
Figure 3-10: NRESET Button
Table 3-10: NRESET Button Details
Component
Button
Micro-B USB
The Micro-B USB connector provides for power and serial access from a host
device, and interfaces to an on-board CP2102N IC which provides access to the
module's UART interface.
When the Development Kit is powered ON:
LED1 (Power) is lit,
•
the host device can connect to the XS1110's console, and
•
12
PCB Label
Description
SWITCH 3
Pushing the WAKE UP button wakes the
module up from sleep mode.
PCB Label
Description
SWITCH 2
Pushing the NRESET button reboots the
module.
41113415